在線留言 | 荔枝app下载链接 歡迎來到荔枝app下载链接官網!
無泄漏磁力導熱油泵
當前位置:首頁 > 產品展示 無泄漏磁力導熱油泵

無泄漏磁力導熱油泵

DR型系列無泄漏磁力導熱油泵,專用于高溫熱油加熱場合或類似的熱媒環境,選用具有較高的磁能積和極低的溫度系數,溫度穩定性和化學穩定性高的磁性材料,可輸送溫度至400℃的熱傳送流體,是一種理想的高溫熱油循...

詳細信息
/ Description

DR磁力驅動導熱油泵
  DR Magnetic Driven Heat Transfer Oil Pump


  DR型系列無泄漏磁力導熱油泵,專用于高溫熱油加熱場合或類似的熱媒環境,選用具有較高的磁能積和極低的溫度系數,溫度穩定性和化學穩定性高的磁性材料,可輸送溫度至400℃的熱傳送流體,是一種理想的高溫熱油循環泵。
  DR series pumps are specially designed for applications with high temperature hot oil heating or similar thermal media environment; they are made with magnetic materials with high magnetic energy product and extremely low temperature coefficient, and high temperature and chemical stability, to transfer heat transfer fluid with temperature up to 400℃, hence an ideal high temperature heat transfer oil circulating pump.

  該產品也可用于輸送低溫流體,應用于恒低溫場合和易結晶流體的輸送。
  The product can also be used to transfer low temperature fluid, in applications of constant low temperature and conveying fluid likely to crystallize.
性能范圍         The main specifications
  流量  Capacity                 1.6~400m3/h
  揚程  Head                     20~125m
  介質溫度  Temperature          -45℃~+450℃
  進口直徑 Inlet dia.                25~200mm

荔枝app下载链接   最大工作壓力  Maximum operating pressure 2.5MPa

型號意義  Type denotation 

結構說明Description of structure

  1.單級單吸離心式結構。
  Single-stage single suction centrifugal structure.

  2.安裝支撐面在泵軸心線的水平面上。
  The mounting support surface is on the horizontal plane of the pump axial centerline.

  3.獨特的內部循環和冷卻散熱系統,保證了內置滑動軸承和磁傳動部件的使用壽命。
  Unique internal circulation and cooling and heat dissipating system, ensuring the service life of built-in sliding bearings and magnetic driving components.

  4.根據熱媒體溫度,必要時對內部循環液和泵支架等進行冷卻,冷卻液量每只管路0.3~0.7m3/h,壓力0.2~0.3MPa。
  The internal circulating liquid and pump supports are cooled when necessary according to the temperature of hot media, with cooling liquid flow of 0.3~0.7m3/h per pipe, at a pressure of 0.2~0.3MPa.

  5.當采用外部循環液時,壓力應高于泵腔內的壓力0.07~0.1MPa,如果輸送易汽化介質時,應高于汽化壓力0.175~0.2MPa。
  When external circulating liquid is used, the pressure should be 0.07~0.1MPa higher than that within the pump cavity, or 0.175~0.2MPa higher than the vaporizing pressure if media likely to vaporize is conveyed.

泵常用材料  Common pump materials 


標準性能表  Standard performance parameters


上一篇:BW不銹鋼保溫泵
下一篇:RY導熱油泵